Skip to content
Comparison

Cutlist Optimizer Software in 2026: The Best Free & Paid Tools Compared

The best cut list optimizer software in 2026 depends on your workshop needs, whether you're a weekend hobbyist, a professional cabinet maker, or running a CNC production line. After testing the most popular options, here's a comparison of free and paid tools covering features, ease of use, pricing, and material yield. Whether you want a free cut list optimizer that works online with nothing to install or a full desktop suite with CNC post-processors, this guide covers the field.

Looking for CutList Optimizer? CutList Optimizer is a separate product from another company, at cutlistoptimizer.com; it is not CutPlan. When we checked its website on 9 October 2026, it was an online optimizer with a free tier and paid options. It is one of the seven tools compared below, and the section on PCs shows which of them need a download. For a feature-by-feature look at the two, see CutPlan vs CutList Optimizer.

If you're new to the concept, start with our complete guide to cut list optimization for background on how optimization algorithms work, what yield percentages to expect, and how grain direction and kerf factor into the equation.

CutPlan cutting layout for a wardrobe, sheet 1 of 3: two tall 1800x580 mm side panels and the top nested on a 2440x1220 mm sheet at 87.7% material yield, numbered in cut order with reusable offcuts measured.
A wardrobe laid out in CutPlan, sheet 1 of 3 at 87.7% material yield: the tall side panels and top nested with every reusable offcut measured. Material yield like this is the real difference between optimizer tools. Tap to enlarge.

What to Look for in a Cut List Optimizer

Not all optimizers are created equal. Before diving into individual tools, here are the key features that separate a useful optimizer from a frustrating one.

Material yield and efficiency. This is the whole point. A good optimizer should consistently achieve 85-95% material utilization on typical projects. The algorithm matters: some tools use simple first-fit-decreasing logic, while others employ more sophisticated bin-packing heuristics that try multiple rotations and arrangements to minimize waste. On our 15-part test cabinet, yield differences between the best and worst tools were as high as 8 percentage points, enough to mean an extra sheet of plywood on a real project.

Grain direction support. If you work with veneered plywood, melamine, or any material where the surface pattern has an orientation, grain direction is non-negotiable. Without it, the optimizer might rotate a door panel 90 degrees to fit better, giving you a cabinet where one door has vertical grain and the other horizontal. Look for per-part grain locking, not just a global setting.

Multiple materials. Most real projects involve more than one material: 18mm carcass plywood, 3mm backing board, solid edging. An optimizer that handles only one material at a time forces you to run separate calculations and track everything manually.

Export options. PDF cut diagrams are the baseline: you need to print something and take it to the saw. CSV export is useful for feeding data into spreadsheets or ERP systems. DXF export matters if you're sending layouts to a CNC machine, where the cutting paths need to be precise vector files rather than visual diagrams.

Offcut and remnant management. After you finish a project, you're left with partial sheets. A good optimizer lets you save these offcuts and include them as available stock in your next project, so you're not buying a fresh sheet when you have a usable remnant on the rack.

Multi-language support. Woodworkers exist everywhere. If English isn't your first language, or if you're running a shop with workers who speak different languages, multi-language support makes the tool accessible to everyone on the team.

Pricing model. Some tools are free with limitations, some charge a monthly subscription, and others sell a one-time desktop license. The right model depends on how often you use the tool. A hobbyist who optimizes twice a month has different needs than a production shop running 20 optimizations a day.

Online vs. desktop. Web-based tools work on any device with a browser: Mac, Windows, Linux, phone, tablet. Desktop tools are limited to one operating system (almost always Windows) but work offline. For most users in 2026, web-based tools offer more flexibility.

Best Free Cut List Optimizers

These tools offer meaningful functionality without payment. "Free" means different things for each: some have usage caps on parts or calculations, some offer a short paid pass, and one is a community edition of a paid product.

CutPlan (cutplan.ai)

CutPlan is a web-based optimizer built for both hobbyists and professionals. The free tier includes 30 calculations per month, 5 exports per month, 1 saved project and up to 150 parts, which is enough for most hobbyists and light professional use. Grain direction, kerf width, edge banding, and multiple material types are all available on the free plan; these aren't paywalled features.

PDF export is free, but PDFs exported on the free plan carry a CutPlan watermark; clean PDFs come with Pro or with a Project Pack. The full feature set includes DXF export and unlimited calculations on the Pro plan ($29/month). For occasional use there are one-off Project Packs: $9 for 1 project, $22 for 3 or $32 for 5. CutPlan supports 21 languages and works on any device, including phones and tablets.

One feature that stands out is offcut inventory tracking. After completing a project, you can save leftover sheet remnants and include them as available stock in future projects. This alone can save significant money over time, especially in a busy shop where partial sheets accumulate.

Best for: Hobbyists who want a generous free tier, international users (21 languages), anyone who needs mobile access, and shops that want offcut tracking without expensive software.

Pros: Grain direction and edge banding on the free plan, works on all devices, 21 languages, offcut tracking, one-off Project Packs as an alternative to a subscription.

Cons: DXF export requires the Pro plan, free PDFs are watermarked, and the free tier is capped at 30 calculations and 5 exports per month (sufficient for most hobbyists but may be tight for daily professional use).

OptiCutter (opticutter.com)

OptiCutter is a well-established web-based optimizer with a solid free tier. The interface is straightforward: enter your stock sheets, add your parts, and run the optimization. It handles grain direction and produces visual cutting layouts.

The free plan is capped at 5 different stocks, 20 part sizes and 500 total parts, which can be restrictive for larger projects. Paid plans raise those limits: Standard (EUR 9/month or EUR 90/year) allows 10 stocks, 100 part sizes and 1,000 parts, and Professional (EUR 19/month or EUR 190/year) is unlimited. According to OptiCutter's own pricing page, PDF, XLS, CSV and DXF export are included in every plan, the free one too. The interface is available in 11 languages.

For a detailed feature-by-feature comparison, see our CutPlan vs OptiCutter page.

Best for: Users who want a simple, no-frills web-based optimizer for straightforward projects.

Pros: Straightforward interface, works in the browser with no installation, DXF export on the free plan, grain direction and kerf settings.

Cons: Free plan limits on stocks, part sizes and total parts; 11 interface languages versus CutPlan's 21.

CutList Optimizer (cutlistoptimizer.com)

CutList Optimizer is a browser-based optimizer with a simple interface. Its page lists cut thickness, panel labels, an edge banding option, an orientation option, PDF and image export, and saving and loading of projects.

Beyond the free tier it sells a single payment of $4.90 that unlocks unlimited calculations and premium features for 3 days, plus Bronze, Silver and Gold subscriptions that can be cancelled at any time. We could not see the free-tier limits or the subscription prices on the vendor's page when we checked, so confirm them there before you rely on them.

See our CutPlan vs CutList Optimizer comparison for specifics.

Best for: Quick optimizations in the browser, including one-off jobs where a 3-day pass is enough.

Pros: Runs in the browser, short 3-day pass for $4.90, PDF and image export, edge banding and orientation options.

Cons: Free-tier limits and subscription prices are not published on the page we checked.

MaxCut Community Edition (maxcutsoftware.com)

MaxCut is a desktop application for Windows with a free community edition. Its Community Edition is listed as always free. The software offers reporting (cut lists, supplier order lists, cabinet labels and quotes) and panel label printing.

According to MaxCut's feature table, the number of parts per project is unlimited in both Community and Business editions. The caps are elsewhere: grain alignment across panels is restricted to 1 in Community, and labels and CSV export are marked as limited. The paid Business Edition is $20 per month or $200 per year per device, excluding VAT.

For details, see our CutPlan vs MaxCut comparison.

Best for: Windows users who prefer desktop software and want detailed reports and labels.

Pros: Free Community Edition with unlimited parts per project, detailed reporting, label printing, runs as a desktop application.

Cons: Windows desktop software (the vendor lists PC/Windows only), some features capped in the Community Edition, Business Edition is licensed per device.

Best Paid Cut List Optimizers

If you're running a professional shop and optimization is part of your daily workflow, these paid tools offer capabilities beyond what free tiers provide.

CutList Plus fx (from $89, one-time)

CutList Plus fx is a long-standing desktop cut list program sold as a one-time purchase with no annual fee, for a single user. It comes in three editions: Silver at $89 (up to 50 parts per project, prints part labels), Gold at $249 (unlimited parts, edge banding) and Platinum at $499 (adds DXF export of diagrams and raw materials import and export). A free trial download is available.

The vendor lists Windows 7, 8 and 10 (32-bit and 64-bit) as the supported systems. There is no web version, and no optimizing on a phone, but free iOS and Android companion apps can view exported project files.

Best for: Windows users who prefer a one-time purchase over a subscription.

Pros: One-time purchase with no subscription, free trial, phone and tablet viewer apps for exported projects.

Cons: Windows desktop only, DXF export only in the $499 Platinum edition, edge banding only from the $249 Gold edition.

CutListEvo (cutlistevo.com)

CutListEvo (branded "Cutlist Evolution" on its website) is a web-based optimizer that runs in any browser and also has a native iOS app. It has a free tier of 40 parts with unlimited stock, and paid tiers by part count: Starter 150, Pro 300, Expert 1,000 and Enterprise 2,000 parts, plus a custom option. A one-day access option is also offered.

The vendor's page lists grain and pattern orientation, labels for every part, edge banding finish in the PDF, quotes and estimates, and DXF and CSV export. Leftover offcuts can be fed into the next calculation manually; full offcut and inventory management is listed for the Enterprise tier only. Subscription prices are not shown on the page we checked.

See our CutPlan vs CutListEvo comparison for a detailed breakdown.

Best for: Shops that want quotes and estimates alongside the cut list, and higher part counts.

Pros: Free tier, web-based plus an iOS app, quotes and estimates, DXF and CSV export listed.

Cons: Prices are not published on the page we checked, full offcut and inventory management is Enterprise only.

PolyBoard + OptiCut (wooddesigner.org)

PolyBoard is cabinet design software, and OptiCut is its companion cut list optimizer, used either standalone or integrated with PolyBoard. OptiCut is sold as a lifetime licence in five versions (Pro PP, Pro, 500, 200 and 50 parts per optimization), from $645 to $3,795.

OptiCut's page lists grain matching across adjacent parts, labels (dimensions, name, material, edging, QR or barcode), edge banding allowances, and stock that is updated after each optimization with offcuts above a minimum size added back. CNC saw output files are included only in the top Pro PP version.

Best for: Cabinet makers who want design software and an optimizer from the same vendor, including CNC saw output in the top version.

Pros: Integration with PolyBoard, grain matching, QR and barcode labels, offcuts returned to stock, one-time licence.

Cons: Higher upfront cost (OptiCut licences from $645, PolyBoard priced separately), Windows only, more than a simple optimization task needs.

Cutlist Optimizer for PC: Download or Browser?

Searching for a cutlist optimizer for PC usually means choosing between installed Windows software (MaxCut, CutList Plus fx) and a web tool that runs in your PC's browser with nothing to install. Our separate guide, cutlist optimizer for PC: download vs free online, covers that choice, including when offline desktop software is the better fit.

This short video shows the browser route on a PC: a kitchen cut list pasted from Excel, calculated with numbered cut steps and exported as a PDF report, with nothing to install.

Comparison Table

Here's a side-by-side overview of all seven tools reviewed above. A dash (—) means we could not verify the point on the vendor's own website, so we do not claim it either way. For more details on any specific matchup, follow the comparison links in each tool's section above.

Prices and plans checked on each vendor's website on 9 October 2026.

Cut list optimizer comparison (checked 9 October 2026)
FeatureCutPlanOptiCutterCutList OptimizerMaxCutCutList Plus fxCutListEvoPolyBoard + OptiCut
Price modelFree; Pro $29/mo; Project Packs $9 / $22 / $32Free; Standard EUR 9/mo; Professional EUR 19/mo (EUR 90 and 190/yr); API EUR 99/moFree; Bronze/Silver/Gold subscriptions (prices not shown); $4.90 for 3 daysCommunity free; Business $20/mo or $200/yr per device, excl. VATOne-time: Silver $89, Gold $249, Platinum $499Free plus tiered subscriptions (prices not shown)OptiCut one-time licence $645–$3,795 (USD)
Free tier30 calculations/mo, 5 exports/mo, 1 saved project, 150 parts, watermarked PDF5 stocks, 20 part sizes, 500 parts—Unlimited parts per project; some features cappedFree trial (length not stated)40 parts, unlimited stock—
PlatformWeb (any browser, phone and tablet)Web, no installationWebWindowsWindows; iOS/Android apps view exported filesWeb plus iOS appWindows
PDF exportYes (watermarked on free plan)YesYes——Yes—
DXF exportPro planYes, in every plan including free——Platinum edition onlyYes (tier not stated)—
Grain directionYes, on free planYes—Yes (grain alignment across panels: 1 in Community)—YesYes
Edge bandingYesYes (option)Yes (option)Shown on labelsGold edition and upYesYes
Offcut trackingYes————Manual feed; full management on EnterpriseYes
Best forFree tier, phones and tablets, 21 languagesSimple jobs in the browserQuick browser layoutsWindows desktop with detailed reportsOne-time purchase on WindowsQuotes and higher part countsDesign software plus optimizer from one vendor

What It Costs to Get Each Capability

Another way to read the field is by the cheapest verified way to get one capability in each tool. A dash (—) means we could not verify it on the vendor's website.

Cheapest verified way to get each capability (checked 9 October 2026)
CapabilityCutPlanOptiCutterMaxCutCutList Plus fx
DXF export for CNCPro, $29/mo (not included in Project Packs)Free plan, within its limits (5 stocks, 20 part sizes, 500 parts)—Platinum, $499 one-time
More than 150 partsPro, $29/mo (free plan: 150 parts)Free plan allows 500 total parts; Professional (EUR 19/mo) is unlimitedUnlimited parts per project in Community (free)Gold, $249 one-time, is unlimited (Silver, $89: 50 per project)
Edge bandingFree planFree plan (option)Shown on labelsGold, $249
Browser and phone, nothing to installYes, free planYes, free planNo (Windows software)No (Windows software; phone apps only view exported files)
Interface languages2111——
Roll materials (fabric, vinyl)Free plan———

Takeaway: if you only need DXF and your job fits OptiCutter's free limits, OptiCutter is the cheapest option. Where CutPlan is cheaper is against the one-time desktop price: DXF with CutPlan Pro is $29 for a month, while the cheapest CutList Plus fx edition with DXF is $499.

How We Tested

To make this comparison as fair and practical as possible, we ran the same project through every tool on this list. The test project was a 15-part kitchen cabinet, a realistic workload that includes carcass panels, shelves, doors, a back panel, and a drawer box, using two different materials (18mm melamine-faced chipboard for the carcass and 3mm HDF for the back).

We measured four things for each optimizer:

  • Setup time: How long it took from opening the tool to having all 15 parts entered with correct dimensions, materials, and grain settings. This includes any account creation or software installation time.
  • Material yield: The percentage of sheet material used by actual parts versus total sheet area purchased. Higher is better. We used the same kerf width (3.2mm) and edge trim (10mm) settings across all tools that supported them.
  • Export quality: Whether the PDF (or printed) output was clear enough to follow at the saw without confusion, including part labels, dimensions, sheet identification, and cut sequence.
  • Ease of use: Subjective assessment of how intuitive the workflow felt, how well the interface communicates what's happening, and how easy it is to make corrections.

Our cabinet test runs were done in March 2026, with web-based tools on Chrome (latest) on both Windows and macOS and desktop tools on Windows 11. Prices, plans and the feature claims in this article were re-checked against each vendor's own website on 9 October 2026; they may change, so always verify on the vendor's website.

A note on fairness: CutPlan is our product, so we've been transparent about where other tools outperform it. MaxCut's desktop reporting is more detailed than ours, CutList Plus fx is a one-time purchase where we are a subscription or per-project pack, and PolyBoard's design-to-cutting integration is something CutPlan does not offer. We believe the comparison is honest, but you should always try the free tiers yourself before committing to any paid plan.

For a deeper look at how CNC nesting compares to manual optimization methods, see our article on CNC nesting vs manual cut lists. And if you're still deciding between free and paid options, our free cut list optimizer guide goes deeper into getting the most from no-cost tools.

Ready to Optimize Your Cut List?

Try CutPlan free: 30 calculations per month, no download, no credit card.

Open Optimizer →

Frequently Asked Questions

What is the best free cut list optimizer?

CutPlan's free tier includes 30 calculations per month with grain direction, kerf width, multiple material types, and watermarked PDF export. That matters because a free optimizer only saves material if it can model your real job, and per-part grain locking and multiple materials are exactly the features that thinner free tiers tend to strip out. OptiCutter has a free plan too, capped at 5 stocks, 20 part sizes and 500 total parts, which can bite on a full kitchen. CutList Optimizer sells a $4.90 three-day pass and subscriptions, and its free-tier limits are not published on the page we checked. MaxCut Community Edition is the free choice if you prefer desktop software on Windows: it lists unlimited parts per project, with some features such as grain alignment across panels, labels and CSV export capped. Pick by workflow: CutPlan for mobile access and multilingual teams, OptiCutter for straightforward jobs, MaxCut for offline Windows use, and try each on a real cabinet before deciding.

Is there a cut list optimizer for Mac?

Yes, but only if you choose a web-based optimizer. CutPlan, OptiCutter, and CutList Optimizer all run inside the browser, so they behave identically on Mac, Windows, Linux, and on phones and tablets, with nothing to install and no compatibility layer to maintain. The desktop tools in this roundup, MaxCut and CutList Plus fx, are Windows-only applications. On a Mac you would need Wine, Boot Camp, or a virtual machine to run them, and each of those adds setup time, licensing questions, and a fresh set of things that can break after a macOS update. For most Mac users the practical answer is simply to use a web tool and skip that entire problem. A working example: enter a cabinet in Safari on a MacBook at the desk, then open the same tool in Safari on an iPad propped next to the saw, because the browser is the only requirement on either machine.

Is there a cut list optimizer for PC, and do I need to download it?

Not necessarily. Modern web-based optimizers run entirely in the browser, so there is nothing to download, nothing to install, and no administrator permission needed on a locked-down work computer. You open the site, enter your parts and stock sheets, and the layout is calculated right there. Desktop tools such as MaxCut and CutList Plus fx work the other way: they need an installer, they occupy disk space, and they tie you to a single operating system, almost always Windows. Their compensating advantage is offline use, which matters if your workshop has no reliable internet connection. For most users the web approach is more convenient, because updates arrive automatically and the same tool works on every device you own without a second installation. The practical test is simple: if you ever want to check a layout from a phone at the lumber yard, a browser tool is the only kind that will be there when you need it.

Which cut list optimizer is best for cabinets?

For kitchen and bathroom cabinets, the three features that matter most are per-part grain direction, support for multiple materials in one project, and a PDF cut sheet clear enough to follow at the saw. Cabinet work almost always mixes a carcass material with a thinner back panel, and the visible doors and end panels must keep their grain running the same way, so an optimizer that lacks either capability forces you into separate runs and manual bookkeeping. CutPlan handles all three on its free tier, which is why it is the default recommendation for most cabinet makers in this comparison. If you want the cabinet design itself to generate the cut list, PolyBoard with OptiCut is the professional route: it works with PolyBoard's cabinet designs, and CNC saw output files are included in the top OptiCut version. The trade-offs are a Windows-only platform and a higher upfront cost (OptiCut licences start at $645, PolyBoard is priced separately).

Is paid software worth it over free?

It depends on how often you optimize. A hobbyist who runs a couple of projects a month is usually well served by a free tier, because the material savings come from the algorithm rather than from paid extras. Professionals cutting daily are different: they run into monthly calculation and export limits, and they may need DXF export to feed a CNC. In CutPlan the limits and DXF export are lifted by the Pro plan, while OptiCutter lists DXF export in every plan, free included. The break-even point is often just one saved sheet of material per month, since a subscription costs less than the sheet it saves. Before committing, run a real job through the free tier and note exactly where you hit a wall; if you never do, stay free. If the wall only appears on an occasional large project, a Project Pack unlocks that single project for a one-off payment without a monthly commitment, which is often the cheapest honest answer.

Guy Bader
Guy Bader
Founder & Maker at CutPlan

Guy founded CutPlan and builds its cut-list optimization engine. He works with woodworkers and cabinet shops to cut material waste, and writes about panel cutting, kerf, and getting clean cuts.

Add CutPlan as a preferred source on Google
Open Optimizer →